Standard Wedge Tile Levelling Clips – 1.0 mm / 1.5 mm

Achieve consistent grout joints and make tile alignment easier while the adhesive cures. MetaKraft Polyform levelling clips are designed for use with a Standard Wedge: the clip base slides beneath the tile, the upright remains in the grout joint and the wedge passes through the opening to hold the two adjacent tiles at the same level.

Two thicknesses available

• 1.0 mm — Fine joint: for a discreet, precise finish.
• 1.5 mm — Standard joint: for consistent, versatile spacing.

Available pack sizes

• 500 pieces: 1 bag of 500
• 1,000 pieces: 2 bags of 500
• 2,000 pieces: 4 bags of 500
• 4,000 pieces: 8 bags of 500

Volume pricing

The same prices apply to both 1.0 mm and 1.5 mm clips.

Benefits

• Clearly packed in counted bags of 500 pieces
• Controlled virgin polypropylene
• Suitable for installing floor or wall tiles
• Two easy-to-identify joint widths: blue 1.0 mm and orange 1.5 mm
• Volume discounts up to 4,000 pieces

How to use

1. Apply the adhesive and lay the first tile.
2. Slide the clip base beneath the edge of the tile.
3. Lay the second tile against the clip upright.
4. Insert a wedge through the opening, perpendicular to the grout joint.
5. Tighten using suitable levelling pliers, then observe the adhesive curing time.
6. Once cured, break off the clip in the direction of the grout joint.

Contents: consumable clips only. Wedges and pliers are not included.

Important: select the required thickness before installation and always follow the adhesive manufacturer's instructions.